Residential

Essex Riviera - Wow factor coastal retreat

Dovercourt, Harwich

 

Harvey Norman Architects have designed a striking, contemporary second home with WOW factor for their client who has spent his career restoring historic buildings!

 
Building Excellence and Considerate Contractor Scheme Awards 2021

Building Excellence and Considerate Contractor Scheme Awards 2021

THE ARCHITECT’S BRIEF

Essex riviera house “Pye End View” has been shortlisted for the Daily Telegraph and Homebuilding & Renovating Awards 2021

Essex riviera house “Pye End View” has been shortlisted for the Daily Telegraph and Homebuilding & Renovating Awards 2021

Having spent his career creating a highly successful Cambridge based building restoration, carpentry and stonemasonry contractor specialising in historic and listed building structures across the country, Stephen wanted a swansong to take him into retirement.

Opting for a completely different architectural direction, his idea was to build a contemporary coastal retreat, close to his other passion sailing his boat off the Essex coast.

Stephen was aware of an empty infill plot on the Dovercourt seafront, on one side adjacent to a war memorial and on the other the mid-19th century High and Low screw-pile Dovercourt lighthouse structures. Raised on the hillside some 15 meters above the beach, the site has fantastic sea views overlooking the shipping channel to the historic Harwich international harbour serving container ships and the Hook of Holland ferry. Also visible on the far horizon, three wind farms and a World War II Maunsell Sea Fort put there originally to defend entry to the Thames estuary approaches.

Like many British seaside towns Dovercourt’s fortunes have varied over the years and as time has passed it has developed a varied building stock and character. The area is currently on the way up being popular with empty nesters moving to the coast and their visiting families.

The brief given to Harvey Norman Architects was as follows:

  • To create a contemporary two bed second home maximising on views that Stephen could enjoy together with family and friends.

  • Although not to be certified Passivehaus, the proposal should strive to do much better than building regulation sustainability standards adopting a fabric-first approach with an emphasis on insulation, airtightness and ventilation.

  • With Stephen’s experience as both a builder, sailor and boat owner where possible detailing and choice of materials should be informed where possible by maritime design.

  • It should also be a clear statement of its time, signalling the rise and popularity of the area and possibly be an inspiration for others to do similar and regenerate the Marine Parade.

THE CHALLENGES

The site had remained undeveloped primarily due to a lack of a foul drainage connection. With his construction experience, Stephen had realised how to unlock this via a pumped solution and negotiated access across neighbouring land and as a result bought the land at risk.

As well as a lack of foul drainage, the site came with other challenges.

  • The rectangular 270m2 site had falls across it in two directions, north-west to south-east some 2.8-meter over a run of 26 meters. Then north-east to south-west, at the centre of the site, 1.7 meters. This resulted in the potential of surface water runoff from the higher north.

  • Located on the marine parade to the south-east there is a lot of pedestrian traffic on the road in front of the site, which meant that privacy and security while maximising views out towards the sea needed to be addressed.

  • To the rear, higher up the hill, on the other side of a small access track along the rear boundary, are located three-storey Victorian terraced houses. Again, these created issues of privacy and neighbour consideration.

  • ·The site also had a relatively narrow frontage of 10.5 meters.+

  • Another major issue was the coastal location and exposure to the elements and sea salt with the corrosive effect that could have on materials.

THE SOLUTION

THE DESIGN CONCEPT

Harvey Norman’s response was to propose an upside-down house with two bedrooms and two bathrooms at the rear of a lower-ground cut into the hillside and double height double aspect open plan living space on the upper-ground.

Picking up on the traditional notion of retired sea captains with their telescopes looking wistfully out to sea a crow’s nest viewing platform / projecting pod was proposed at second floor level forming a prominent architectonic feature in the building’s front elevation.

All three levels were to be linked by an architectural promenade starting from the external approach to the front door, then into and through a top lit two and a half storey high entrance space then around and up an open metal staircase with glass treads, up lit at night from below, terminating at the crow’s nest a level above and open to the upper-ground space below via a minstrel gallery. The promenade circulation zone is further emphasised by the supporting spine wall, clad in the same external elongated blue-black engineering brick used externally intended to give the impression of the external brick protruding into the interior from the outside.

In response to the sloped site and to simplify the superstructure build the substructure solution was to excavate into the slope and retain the entire site from boundary to boundary with a concrete box. This would mean the following advantages:

  • External access on all sides at the lower level.

  • Windows giving light and natural ventilation to the rear bathrooms

  • No superstructure tanking or damp issues to the superstructure.

Cutting the building into the slope also ensured that neighbours to the rear had their sea view protected as they would view the building from the rear as a single storey. The sloping copper cladding, triangular rooflights also gave them an interesting aspect.

The superstructure was created around a steel frame infilled at the lower-ground with masonry cavity wall construction and above at upper-ground level and the roof infill timber framing.

Because of the exposed nature of the site the building and external materials used needed to be tough, robust, watertight, and resistant to salt corrosion giving the building a distinct character. The choices were:

  • For the roof, a copper standing seam covering which in time will turn green. The project has since been awarded the classification “outstanding” by the Copper Development Association.

  • 290 mm x 55 mm elongated and narrow facing blue black engineering brick for the lower-ground podium and front area boundary.

  • The upper levels are clad in, from a renewable, sustainable source, heavy brushed burnt/charred Siberian larch timber “Yakisugi (焼杉)” / “Shou Sugi Ban” cladding and copper cladding and facias.

  • Marine-grade powder coated aluminium external doors and windows.

Amenity space was maximised by the creation of three generous external spaces. Firstly, on the south-east elevation overlooking the sea, a protected lower-ground terrace outside the bedrooms bounded again, achieved by the engineering brick and glass-topped walls and directly above an upper-ground terraced balcony. The design also allowed two car parking spaces with three phase reaching supply, bin store and planters all discreetly integrated into the overall design, also creating defensible space separating the lower ground terrace and house generally from the public realm. Then, to the rear, an upper-ground more protected terrace from the elements, which also allowed disabled access to the upper-ground via a gate in the rear boundary.

On both the rear and front upper-ground terraces, the decking was constructed from teak boarding as found on boat decks. This material was also used on the front bin stores. The structure of the rear terrace platform was constructed from beam and block spanning between the building and the rear retaining structure which resulted in a covered undercroft storage area and workshop below.

SUSTAINABILITY

From the outset of the design, not least because of the wish to maximise glass openings and views to the south-east which could run the risk of overheating, the evolving design was modelled using the Passive House Planning Package (PHPP) software, providing confidence that the performance targets could be achieved. This model was then revived as the detailed and technical design evolved and resulted in the choices and incorporation of the following strategies:

  • Passive solar design: The maximisation of heat gains from south-east facing opening during winter and the use of brick spine wall as a thermal store

  • External overhang shading on the south-east elevations at both levels and internally using blinds.

  • Double glazing and glazing coatings.

  • The installation of an airtight layer and achieving good airtight construction. In the end the project had a target air change rate per hour of 3 per hour but achieved 2.24. However, to put this in context, the building regulations ask for 10.

  • A continuous enhanced thermal envelope of insulation. High attention to the avoidance of thermal bridging.

  • Utilising mechanical ventilation, heat recovery and high air quality.

  • Maximisation of natural daylight to the upper levels at all times of the day

Microgeneration was not viable, there was not enough space on the roof for enough photovoltaic panels, and there was a wish to protect the rear neighbour’s aspect. Ideally, an air source heat pump would have been the first choice, but due to a lack of external space a gas boiler and sealed heating system with a hot water storage tank with radiant heating. In addition to the ventilation heat recovery, when additional heating is required, it is distributed by underfloor heating throughout. The brick spine wall also contributes as a thermal store.

PROJECT HIGHLIGHTS

  • Because of Stephen’s background, the construction of the project was highly crafted with a high and precise level of workmanship and attention to detail.

  • The inclusion of the triangular rooflights and the double aspect on the upper-ground, as the sun moves, results in continuous high levels of natural light pouring into the building, changing the character of the interior depending on the time of day.

  • Due to the airtight construction and the use of high-quality double-glazed windows a high level of sound attenuation is achieved, giving the building a highly perceivable calm and restfulness.

  • Amazing views over the continually animated sea scape with the arrival of international shipping and ferries plus smaller craft and residents and holiday makers passing along the pedestrian promenade in front of the building.

  • Fantastic sunrises horizons over the sea

POSTCRIPT – Covid 19

 Towards the middle of the build, Covid- 19 hit. This resulted in further challenges of fallow periods with no one working on-site, difficulties in obtaining and long lead-in and delays to materials. The project was however completed in Autumn 2020 the final irony being that due to lockdown restrictions on the use of second homes, Stephen has had to wait all winter to spend a night at the house. He is now in and is very happy.

Like this post? Consider sharing it or saving it for later.

Kingston - two new build houses

Two new residential new builds by Harvey Norman Architects, Cambridge

two SUSTAINABLE, contemporary and innovative self build homes, one a four bed barn style home with a detached garage plus a second three storey five bedroom house with cinema room and self contained space above linked garage.

Like this post? Consider sharing it or saving it for later.

Main Street, Caldecote - new build house

An innovative, contemporary, black timber clad barn inspired five bed family home with separate double garage for private clients. The new house is set on a semi-wooded, 1.9 acre site, 15 miles to the west of Cambridge, midway down the northern slope of and with stunning view over the rolling open countryside of the Bourn Valley.

The new building will hunker down approximately 0.5 meters into the ground, on the footprint of the existing two combined cottages, to minimise the impact on existing trees and wildlife .

The orientation of the building allows the proposal to open its south and west elevations to the sun and the garden while keeping its eastern and north elevations protected from the elements. To reinforce this idea, the eastern elevation, fronting Main Street will have minimal glazing in an irregular pattern of a few small windows in order to be consistent with traditional barn style design. The south and western private elevation to the rear will be much more open in terms of glazing.

The building has been planned, by Harvey Norman Architects to optimise a passive design approach. This is to be achieved in part by optimising room sizes and layout with service areas to the east and habitable spaces to the west to make the most of the orientation for both solar gain, natural daylights and views out.

Like this post? Consider sharing it or saving it for later.

Hatfield

An ultra modern house refurbishment by Harvey Norman Architects Hatfield

Like this post? Consider sharing it or saving it for later.

Cottenham - new build house

A residential new build by Harvey Norman Architects Cambridge

To create a contemporary, low cost and sustainable, cheap to run, three bed home for a young couple in the rear garden of their parent’s house.

From the late 19th century the economy of Cottenham was dominated by the growing of fruit for the Chivers Jam factory in Cambridge and also flowers in many small-scale agricultural farm holdings located within the boundary of the village.

As a result, Cottenham was characterised by long plots of up to 300m backing onto open countryside. Farmhouses lined the street resulting in little space at the front of plots, with access to hard standing and yards traditionally to the side and behind. Agricultural outbuildings ran along the edge of plots, many of which follow the original farmstead boundaries with other buildings set at 90 degrees.

Since the 1960s, and the closure of Chivers, there has been a significant shift away from land-based, local work, the vast majority of the working population now being employed outside the village.

The photo below shows how the site would have looked in the 1960s.

Concept

Our design response was to use this old agricultural historic fabric and local aesthetic reinterpreting it as a contemporary barn style building using the traditional materials such as black weatherboarding and black corrugated roofing in a modern manner so that the new building read as a converted outbuilding able to be glimpsed by passers-by through gaps between the old farmhouses lining the high street.


Design

The south facing two storey building itself (114m2 / 1227 sq ft of internal space) achieves an open plan kitchen and living area with a two storey void over and aspect to front, side and sliding full height doors overlooking large garden and decking, three bedrooms and family bathroom, ground floor WC and study.

The simple rectangular compact timber frame design, but from simple readily available materials has the advantage that it is a simple, quick and cheap build.

Investing in the fabric

Rather relying on technology to generate heat, which can go wrong, needs maintenance and becomes outdated quickly, to save energy and keep running costs down a “fabric first” approach was taken to be achieved through insulation, good windows, airtightness and optimised design to capture passively as much of the sun’s heat as possible.


Like this post? Consider sharing it or saving it for later.

Swavesey - residential barn conversion

A residential barn conversion by Harvey Norman Architects Cambridge

The residential conversion has been designed to work around and with the existing timber frame structure. The single storey open rear storage barn is being replaced with a new build two storey element which echoes and reinterprets the form and mass of the original structure. It also takes full advantage of the south facing views of open countryside. The design concept is further reinforced by the use of a contemporary interpretation of the original brick, metal and black timber weatherboarding.

The planning process for the Swavesey barn conversion

This project was about the bringing together of expertise in planning and architecture to ensure that a viable use was found for a now redundant agricultural building. The old agricultural building clearly needed to be developed. Since no viable commercial use was found for the building, it has been pleasing to be involved in a project that found a quality residential use for the building that complemented existing surrounding buildings so well and also significantly enhanced the clients’ asset value.
— Jim Bryant, Bryant Land & Property

The project presented a number of challenges that involved three teams of experts — Harvey Norman Architects, PlanSurv and Bryant Land & Property. It was decided that the prior approval route for the conversion of agricultural buildings, allowed under Class Q of the General Permitted Development Order was too restrictive. In order to support an application for full planning permission is was necessary to demonstrate that other alternative uses were not feasible. This was achieved through a 12 month marketing campaign run by Bryant Land & Property. Following this process the submitted application included a significant element of new build which utilised the footprint of an existing steel portal framed building. The council agreed this rationalised the site and made an attractive rural residence without compromising the farmyard character.

PlanSurv is delighted to have been able to help secure planning permission for the residential conversion and extension of this historic farm building; thereby ensuring its long term future and maintaining the contribution it makes to the local landscape.
— Michael Hendry, Director, PlanSurv

ABOUT THE BARN CONVERSION SITE IN SWAVESEY

The group of agricultural buildings are some 80 meters from the road, overlooking open fields and a small brook to the south.  Other buildings in the group, but not part of the proposals are a detached 19th Century stock brick farm house and a single storey metal open sided range of storage buildings providing cover to open brick storage pens. The building to be converted is a traditional black weatherboard clad timber frame barn on a brick plinth with corrugated cladding to the roof. To the side is a single storey brick barn with the same roof and to the rear a 20th century metal open sided storage barn with a barrel vaulted portal frame with corrugated metal clad roof.

Like this post? Consider sharing it or saving it for later.

Sandpit Lane

A modern house extension by Harvey Norman Architects St Albans


 

Architects project brief

The MacElvogue's had returned to England after many years working around the world. They came back to a home they had bought 15 years ago, now tired, out of date and unsuitable for the families needs. The client wanted to reorder the ground floor, extend to create a new open plan family room and kitchen, and incorporate a separate self contained granny flat. Bringing light into this dark 1970s property was a key part of the brief. 

 

Design concept and goals

  • Make better use of the existing internal space

  • Cater to the needs of a broad age range, owners, John and Rachel, two teenager and Grandmother in her eighties

  • Create close contact with the redesigned garden through a completely glazed gable with sliding doors and a raised terrace

Problems to solve for client

  • Transform a dark 1970s house to a light and modern open plan style

  • Integrate smart media and computer systems

Architects challenges

  • North facing aspect to the garden

  • Lower level rear garden

  • Fresh planning application needed to accommodate the suggested design


 

Project highlights

This projected resulted in a multi-generational home with a separate but connected granny flat with its own lounge, bedroom, kitchenette, shower room and separate external side entrance and ramp. The conversion of the garage created a new home office. Under floor heating and aluminum faced composite windows were used throughout. 

looking through

The enclosure of the open porch formed a lobby with views all the way through, from the entrance door to the garden beyond

Open plan zoning

The new “L” shaped extension with roof lights creates a zoned open plan family room. It includes a brand new kitchen with island, and adjacent dining area

indoor and outdoor living

Full height sliding aluminum doors with gable over both connects to the new terrace and redesigned garden by Julian Tatlock


 

Photo gallery and video testimonial

We are very happy with the space created. It is bright, functional, contemporary, makes a statement and incorporates the garden into the house, or vice versa depending what is required. The annexe currently provides a home for a seriously ill parent and allows separate living spaces with the ability to attend to and oversee care and treatment. It also successfully ensures elderly parent is not isolated.
— Rachel MacElvogue

 

Project plans and architects drawings


 

Project details

Building structure and CONSTRUCTION system

Structural works included lots of relatively complicated internal steelwork, external render and a zinc roof. The construction system included piled foundations, suspended concrete floor and a cut timber roof structure. ID system sliding doors, Glazing Visions roof lights and composite Velfac windows were used to bring light in. 

Sustainability

Highly insulated fabric first approach, space saving and efficient under floor heating and deliberate use of local contractors and suppliers.


 

Project post-mortem

A tired 1970s house was successfully modernised to provide contemporary open plan living. Interiors design work included a modern kitchen, flexible lighting systems, furniture sourcing and brand new doors and windows. The garden was completely redesigned by Julian Tatlock to create a refreshing outside in effect. 

Before

Before

Before

Before

After

After

Costs

Excluding VAT and fees the project came in at £209,000. The property is now valued at £1 million.

Demolition and alteration: £13,946.58
Oversite: £5,502.56
Foundations: £11,466.40
Superstructure (masonry): £7,233.85
Roof structure (cut pitched roof): £9,106.27
Rainwater goods: £199.32
Roof finishes: £7,375.50
External doors and windows: £55,974.67
Internal doors: £3,102.90
First fix carpentry: £3,399.23
Finishes: £28,349.97
Second fix joinery: £1,567.99
Mechanical and electrical: £38,610.70
Kitchen fitting: £12,500.00
Decoration: £5,705.20
Surface water drainage (all provisional): £904.11
External works: £5,611.66
Provisional sums: £24,000.00
Sundry additional works: £10,666.32
 

TOTAL: £209,756.83

 

Like this post? Consider sharing it or saving it for later.

Battlefield Road

house extension by Harvey Norman Architects St Albans


 

Architects project brief

The clients had lived in a large 1930s arts and crafts house for a while. The main pain point was a small kitchen not suited for 21st century living — it was set to the side of the dining room as is typical of houses of this period. There had also been a small post war utility room that created a fractured layout that was difficult to use and disconnected from the rear garden.

 

Design concept and goals

  • Maximise natural light
  • Create a terrace for the house
  • Visually connect the house with the garden

Architects challenges

  • Due to the East, West orientation of the house, only the rear of the property saw morning light
  • The change in levels from the main house to the garden below

PROBLEMS TO SOLVE FOR CLIENT 

  • Poorly functional small kitchen
  • Small family bathroom in need of a redesign
  • Create a new utility room with its own side access
  • Keep existing low ceiling height in the first floor bedrooms and maintain uninterrupted 2.7m height from the existing ground floor to the new
  • Move existing WC to allow the adjacent front room to be enlarged 

 

Photo gallery

 

Project highlights

  • Lots of natural light from two sides and above — achieved with Kloeber doors and glazing vision rooflights
  • A large open plan style was cleverly zoned into modern kitchen, dining and living spaces
  • Layered lighting schemes emphasized zoning, task and feature lighting
  • Stylish lightly coloured stone flooring added to the spacious feel
  • Luxurious and high quality family bathroom achieved with CP Hart fittings

Battlefield_Page_1.jpg

GOOD HOMES MAGAZINE

September 2017

Project plans and architects drawings


 

Project details

Building structure

The building structure used relatively straightforward load bearing masonry with beam and block suspended floor, flat timber roof with single ply high performance roof with applied standing wealts.

Sustainability

The project used a simple but effective highly insulated fabric first approach and deliberate use of local contractors and suppliers. LED lighting was also introduced for a significant increase in energy efficiency as they consume up to 90% less of traditional lighting.

Interiors

Main interiors were supplied by

Project costs

  • Demolition & Site Preparation: £9,663.99
  • Building works: £49,645.25
  • Doors and windows: £24,016.16
  • Joinery and decoration: £7,839.01
  • Services: £20,762.55
  • Hard Landscaping (Terrace): £18,610.32
  • Kitchen: £45,000.00
  • Bathroom & WC Fittings: £9,000.00
  • Professional fees (not including Quantity Surveying and Engineering fees): £6,955.30

 

Like this post? Consider sharing it or saving it for later.

Crossfields

Crossfields

This project connected a previous rather long and dysfunctional 1970’s side extension to this mid war house. The side extension was linked to the existing kitchen and utilities by creating a new much larger zoned light and airy family room. This space including a kitchen, dining and seating area gave three times as much space for day to day living and entertaining.

Like this post? Consider sharing it or saving it for later.